Caig Deoxit Fader F Series F100L 100% 2mL tube


Clean, lubricate & protect conductive plastic and carbon compound faders & pots.

DeoxIT®Precision Fader lubricant for conductive plastics and carbon-based controls
(faders, slide potentiometers, conductive membranes – mouse pads and
other mechanisms with sliding surfaces). It replenishes lubrication lost on
surfaces that have been cleaned with solvents or other cleaning solutions.
Use on conductive plastics and other sliding metal-plastic surfaces.


  • 100% Liquid, Safe on plastics.
  • DeoxIT® Fader F100L concentrate has approximately 0.0% chemical cleaning action.
  • DeoxIT® Fader is not for metal contacts/connectors, use DeoxIT® D100, DeoxIT® Gold G100and DeoxIT®
    Shield S100 for those surfaces (see my other items).
  • Replaces lubrication lost that have been cleaned with solvents or other cleaning solutions.
  • Excellent enhancing, excellent protection, No ozone depletion.
  • Reduces intermittent connections, arcing, RFI, wear and abrasion.
  • Temperature Range, -26 C to +150 C
    DeoxIT® D100L Squeeze Tube, 100% solution, 2 ml,
    (Applications = 50 +/- drops, 0.04 ml/drop)

Out of stock



Directions for Use:

  • Turn off and unplug device
  • DeoxIT® Fader F100 is for conductive plastic materials; however, there may be metal materials involved with the contact or control. On these metal surfaces that have been in service or have visual signs of oxidation or corrosion pre-treat with DeoxIT® D100L (see my other items)
  • DeoxIT® Fader F100 should be applied to clean conductive plastic surfaces. If surface has contamination (dust, dirt, drink spills, etc.), pre-clean with DeoxIT® D100L (see my other items)
  • Once clean, apply a small amount of Fader F100 onto the plastic surface
  • To prevent over use in unwanted areas, you can apply onto a lint-free swab or cloth and then using the swab/cloth apply the F100 to the control/contact surface(s)
  • Operate the part/device to help distribute the Fader F100 in the control or contact area
  • Wait a few seconds, reapply another small amount
  • It is important to wipe off excess
  • Wait two minutes before turning on equipment